Catch EV charger faults before drivers do
Every hour, WebRun checks EV charger status codes in Flash Parking across every garage, posts an immediate Slack alert to your facilities team the moment a charger faults, and drafts a service ticket email to your maintenance vendor for any fault that persists, left for your team to review and send.
- No credit card
- Under $0.01 per run
- Cancel anytime
How do I get alerted when an EV charging station faults?
WebRun checks the status code for every EV charging station in Flash Parking each hour. The moment a real fault appears, it alerts your facilities team in Slack with the garage and station number, and for faults still open after 2 hours, drafts a service ticket email to your maintenance vendor, left unsent for your team to review and send.
- Facilities knows about a faulted charger within the hour, not when a driver complains
- Persistent faults get a ready-to-send vendor ticket automatically
- In-use chargers never trigger a false fault alert
Built for parking garage operators · EV charging facility managers · mixed-use garage operators · parking management companies
What does WebRun do on every run?
The exact actions WebRun takes, in order - in plain language, so you can adjust anything.
-
WebRun signs in and gets to work
Opens
www.flashparking.comin a real browser with your saved login - no setup, no API keys. -
1
Flash Parking - check charger status codes
flashparking.com How to Automate Flash Parking
WebRun opens Flash Parking to check charger status codes. - Open Flash Parking and read the status code for every EV charging station
- Separate a real fault code from a station that is simply occupied or offline for a scheduled reason
- Note how long each faulted station has been down
Done when Every charger's status has been checked and any fault identified.
-
2
Slack - alert facilities immediately
slack.com How to Automate Slack
WebRun opens Slack to alert facilities immediately. - Post an alert to the facilities channel naming the garage, the station number, and the fault code
- Mark it urgent if the station has been faulted for more than 2 hours
Done when Facilities has the fault alert with the station and duration.
-
3
Gmail - draft a service ticket
gmail.com How to Automate Gmail
WebRun opens Gmail to draft a service ticket. - For any fault still open after 2 hours, draft a service ticket email to your maintenance vendor with the station number and fault code
- Leave it as a draft. WebRun never emails the vendor on its own
Done when A ready-to-send service ticket draft exists for every persistent fault.
How is each run configured?
Secure by default
Connect once, stays signed in
WebRun signs in once and keeps each session in a persistent environment, so every run picks up right where it left off.
Every action is checked against this policy before it runs.
Questions, answered
Will it contact the maintenance vendor without approval?
No. For faults still open after 2 hours, WebRun drafts a service ticket email and leaves it unsent in Gmail for your facilities team to review and send.
How does it tell a real fault from a charger just being in use?
It reads the specific status code Flash Parking reports for each station, not just whether it's occupied, so an in-use charger doesn't trigger a false alert.
How fast are faults flagged?
Within the hour they appear. Any fault still open after 2 hours is marked urgent in Slack and gets a draft service ticket.
Related templates
Put this on autopilot.
Turn it on in minutes - or have our team set it up for you.